@encoding=UTF-8
# The configuration file must begin with a line declaring its encoding.

# Default mode for file inclusions
@include.default_mode=required

# Include file problems can be debugged by removing '#' at the beginning
#  of the following line:
#@include.debug

#********************************************************************
# Wrapper License Properties (Ignored by Community Edition)
#********************************************************************
# Professional and Standard Editions of the Wrapper require a valid
#  License Key to start.  Licenses can be purchased or a trial license
#  requested on the following pages:
# https://wrapper.tanukisoftware.com/purchase
# https://wrapper.tanukisoftware.com/trial

# The Wrapper will look for either of the following optional files for a
#  valid License Key.  License Key properties can optionally be included
#  directly in this configuration file.
@include.optional ../conf/wrapper-license.conf
@include.optional ../conf/wrapper-license-%WRAPPER_HOST_NAME%.conf

# The following property will output information about which License Key(s)
#  are being found, and can aid in resolving any licensing problems.
#wrapper.license.debug=TRUE

#********************************************************************
# Wrapper Localization
#********************************************************************
# Specify the language and locale which the Wrapper should use.
#wrapper.lang=en_US # en_US or ja_JP

# Specify the location of the language resource files (*.mo).
wrapper.lang.folder=../lang

#********************************************************************
# Wrapper Java Properties
#********************************************************************
# Java Application
#  Locate the java binary on the system PATH:
wrapper.java.command=java
#  Specify a specific java binary:
#set.JAVA_HOME=/java/path
#wrapper.java.command=%JAVA_HOME%/bin/java

# Tell the Wrapper to log the full generated Java command line.
#wrapper.java.command.loglevel=INFO

# Wrapper Jar file
wrapper.jarfile=../lib/wrapper.jar

# Log level for notices about missing Java Classpath entries.
wrapper.java.classpath.missing.loglevel=WARN

# Java Classpath.  Add class path elements as needed starting from 1
#wrapper.java.classpath.1=

# Java Modulepath. (Requires Java 9 or above)
#  Add module path elements as needed starting from 1
#wrapper.java.module_path.1=

# Java Module list. (Requires Java 9 or above)
#  Add module names as needed starting from 1
#wrapper.java.module.1=

# Java Library Path (location of wrapper.dll or libwrapper.so)
wrapper.java.library.path.1=../lib

# Java Bits.  On applicable platforms, tells the JVM to run in 32 or 64-bit mode.
wrapper.java.additional.auto_bits=TRUE

# Java Additional Parameters
wrapper.java.additional.1=

# Initial Java Heap Size (in MB)
#wrapper.java.initmemory=3

# Maximum Java Heap Size (in MB)
#wrapper.java.maxmemory=64

# Application System Properties passed via the backend.
#  Core Java System Properties must be passed using wrapper.java.additional.<n>.
wrapper.app.property.1=

# Java Main class.  This class must implement the WrapperListener interface
#  or guarantee that the WrapperManager class is initialized.
#  Helper classes are provided to do this for you.
#  See the following page for details:
#  https://wrapper.tanukisoftware.com/doc/english/integrate.html
wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp

# Application parameters.
#  Pass parameters via the backend instead of the command line.
#wrapper.app.parameter.backend=TRUE

#  Add parameters as needed starting from 1
wrapper.app.parameter.1=<YourMainClass>

#********************************************************************
# Wrapper Logging Properties
#********************************************************************
# Enables Debug output from the Wrapper.
# wrapper.debug=TRUE

# Format of output for the console.  (See docs for formats)
wrapper.console.format=PM

# Log Level for console output.  (See docs for log levels)
wrapper.console.loglevel=INFO

# Log file to use for Wrapper output logging.
wrapper.logfile=../logs/wrapper.log

# Format of output for the log file.  (See docs for formats)
wrapper.logfile.format=LPTM

# Log Level for log file output.  (See docs for log levels)
wrapper.logfile.loglevel=INFO

# Roll mode of the log file.
#  SIZE_OR_WRAPPER causes the file to be rolled whenever its size exceeds the
#  value defined by wrapper.logfile.maxsize, or whenever the Wrapper is
#  launched.
wrapper.logfile.rollmode=SIZE_OR_WRAPPER

# Maximum size that the log file will be allowed to grow to before
#  the log is rolled. Size is specified in bytes.  The default value
#  of 0 disables log rolling.  May abbreviate with the 'k' (kb) or
#  'm' (mb) suffixes.  For example: 10m = 10 megabytes.
wrapper.logfile.maxsize=10m

# Maximum number of rolled log files which will be allowed before old
#  files are deleted.  The default value of 0 implies no limit.
wrapper.logfile.maxfiles=9

# Log Level for sys/event log output.  (See docs for log levels)
wrapper.syslog.loglevel=NONE

#********************************************************************
# Wrapper General Properties
#********************************************************************
# Allow for the use of non-contiguous numbered properties
wrapper.ignore_sequence_gaps=TRUE

# Do not start if the pid file already exists.
wrapper.pidfile.strict=TRUE

# Title to use when running as a console
wrapper.console.title=@app.long.name@

#********************************************************************
# Wrapper JVM Checks
#********************************************************************
# Detect DeadLocked Threads in the JVM. (Requires Standard Edition)
wrapper.check.deadlock=TRUE
wrapper.check.deadlock.interval=60
wrapper.check.deadlock.action=RESTART
wrapper.check.deadlock.output=FULL

# Out Of Memory detection.
#  Ignore -verbose:class output to avoid false positives.
wrapper.filter.trigger.1000=[Loaded java.lang.OutOfMemoryError
wrapper.filter.action.1000=NONE
#  Ignore -Xlog:class+load=level output to avoid false positives.
wrapper.filter.trigger.1001=[class,load] java.lang.OutOfMemoryError
wrapper.filter.action.1001=NONE
# (Simple match)
wrapper.filter.trigger.1002=java.lang.OutOfMemoryError
# (Only match text in stack traces if -XX:+PrintClassHistogram is being used.)
#wrapper.filter.trigger.1002=Exception in thread "*" java.lang.OutOfMemoryError
#wrapper.filter.allow_wildcards.1002=TRUE
wrapper.filter.action.1002=RESTART
wrapper.filter.message.1002=The JVM has run out of memory.

#********************************************************************
# Wrapper Email Notifications. (Requires Professional Edition)
#********************************************************************
# Common Event Email settings.
#wrapper.event.default.email.debug=TRUE
#wrapper.event.default.email.smtp.host=<SMTP_Host>
#wrapper.event.default.email.smtp.port=25
#wrapper.event.default.email.subject=[%WRAPPER_HOSTNAME%:%WRAPPER_NAME%:%WRAPPER_EVENT_NAME%] Event Notification
#wrapper.event.default.email.sender=<Sender email>
#wrapper.event.default.email.recipient=<Recipient email>

# Configure the log attached to event emails.
#wrapper.event.default.email.maillog=ATTACHMENT
#wrapper.event.default.email.maillog.lines=50
#wrapper.event.default.email.maillog.format=LPTM
#wrapper.event.default.email.maillog.loglevel=INFO

# Enable specific event emails.
#wrapper.event.wrapper_start.email=TRUE
#wrapper.event.jvm_prelaunch.email=TRUE
#wrapper.event.jvm_start.email=TRUE
#wrapper.event.jvm_started.email=TRUE
#wrapper.event.jvm_deadlock.email=TRUE
#wrapper.event.jvm_stop.email=TRUE
#wrapper.event.jvm_stopped.email=TRUE
#wrapper.event.jvm_restart.email=TRUE
#wrapper.event.jvm_failed_invocation.email=TRUE
#wrapper.event.jvm_max_failed_invocations.email=TRUE
#wrapper.event.jvm_kill.email=TRUE
#wrapper.event.jvm_killed.email=TRUE
#wrapper.event.jvm_unexpected_exit.email=TRUE
#wrapper.event.wrapper_stop.email=TRUE

# Specify custom mail content
wrapper.event.jvm_restart.email.body=The JVM was restarted.\n\nPlease check on its status.\n

#********************************************************************
# Wrapper Secure File Properties
#********************************************************************
# To enforce the principle of least privilege for files containing
#  sensitive data, the Wrapper requires that all permissions granted
#  to these files be explicitly allowed in the configuration.
#  Please read the documentation for the full list of properties.

# Allow specific accounts or groups on Windows.
#wrapper.secure_file.check.windows.allowed_account.1=NT AUTHORITY\SYSTEM
#wrapper.secure_file.check.windows.allowed_account.2=BUILTIN\Administrators

# Allow specific groups on Unix systems.
#wrapper.secure_file.check.unix.allowed_group.1=<Group_Of_Users>

# Additional files to check for permissions (Requires Standard Edition)
#wrapper.secure_file.additional.1=<Secured_File>

#********************************************************************
# Wrapper Windows Service Properties
#********************************************************************
# WARNING - Do not modify any of these properties when an application
#  using this configuration file has been installed as a service.
#  Please uninstall the service before modifying this section.
#  The service can then be reinstalled.

# Name of the service
wrapper.name=@app.name@

# Display name of the service
wrapper.displayname=@app.long.name@

# Description of the service
wrapper.description=@app.description@

# Service dependencies.  Add dependencies as needed starting from 1
wrapper.ntservice.dependency.1=

# Mode in which the service is installed.
#  AUTO_START, DELAY_START (Requires Standard Edition) or DEMAND_START
wrapper.ntservice.starttype=AUTO_START

# Account to use when running the service.
#  The default blank value will use LocalSystem, which is highly privileged
#  account on Windows. Please read the documentation page for this property to
#  learn about other account types that can be used.
wrapper.ntservice.account=

# Allow the current user to perform certain actions without being prompted for
#  administrator credentials. (Requires Professional Edition)
#wrapper.ntservice.permissions.1.account=CURRENT_USER
#wrapper.ntservice.permissions.1.allow=START, STOP, PAUSE_RESUME